Delta DVP-ES3 Series User Manual

DVP-ES3 Series Operation Manual
9-72
_9
Item Description
User ID
To name your user ID, you can use up to 16 characters from the following characters,
A through Z (case-insensitive ), 0 through 9, _ (underscore) , (comma) and . (dot) .
 The first default user ID is “Admin” (read only).
Password
To name your password, you can use up to 16 characters from the following
characters, A through Z (case-insensitive ), 0 through 9, _ (underscore) , (comma)
and . (dot) .
 No password for the default user ID “Admin” (read only), you can set up the
password later.
Access type
Administrator: You can set up all parameters and have permission to edit the
password and permission.
Write/Read: You can open the data monitor pages and the diagnostic page. You can
also edit the parameters.
Read: You can open the data monitor pages and the diagnostic page. But you cannot
edit parameters.
 Default user is “Administrator”.
“Delete”
Use “Delete” to clear the user ID and password.
“Apply”
Use “Apply” to save the settings.
 Operation Steps:
a. After log in, double-click Account management to open the setting page.

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English