Delta ECMA-C 0807 Series User Manual

Chapter 8 Parameters ASDA-A2
8-28 Revision February, 2017
Unit：
-
Range：
determined by the corresponding parameter
of P0-41
Data Size：
32-bit
Format：
Hexadecimal
Settings：
The using method is the same as P0-25. The mapping target is set by
parameter P0-41.
P0-32 MAP8 Mapping Parameter # 8
Address: 0040H
0041H
Operational
Interface：
Panel / Software Communication
Related Section:
4.3.5
Default：
No need to initialize
Control
Mode：
ALL
Unit：
-
Range：
determined by the corresponding parameter
of P0-42
Data Size：
32-bit
Format：
Hexadecimal
Settings：
The using method is the same as P0-25. The mapping target is set by
parameter P0-42.
P0-33 ~
P0-34
Reserved
P0-35 MAP1A Target Setting of Mapping Parameter P0-25
Address: 0046H
0047H
Operational
Interface：
Panel / Software Communication
Related Section:
4.3.5
Default：
0x0
Control
Mode：
ALL
Unit：
-
Range：
determined by the communication address of
the parameter group
Data Size：
32-bit
Format：
Hexadecimal

Delta ECMA-C 0807 Series Specifications

General

Brand	Delta
Model	ECMA-C 0807 Series
Category	Servo Drives
Language	English