ASDA-A2 Chapter 8 Parameters
Revision February, 2017 8-125
0: Enable lack phase (AL022) detection
1: Disable lack phase (AL022) detection
Bit13: Encoder output error detection function
0: Enable encoder output error (AL018) detection function
1: Disable encoder output error (AL018) detection function
Bit15: Friction compensation mode selection
0: If the speed is slower than the value of P1-38, the compensation
value remains.
1: If the speed is slower than the value of P1-38, the compensation
will become 0 according to the smoothing time of P1-63.
P2-66 GBIT2 Special-bit Register 2
Address: 0284H
0285H
Operational
Interface：
Panel / Software Communication
Related Section: -
Default：
0
Control
Mode：
PT / PR / S
Unit：
-
Range：
0 ~ 0x000F
Data Size：
16-bit
Format：
Hexadecimal
To Next Page
Loading...
