Page 2 of 84 eZV-440 Application Guide
Edition 2.6
enOcean Integration (firmware 2.2 and higher) 18
Upgrade to Fully Programmable Using Flash Loader (firmware 2.2 and higher) 18
VAV/VVT Programmable Objects 19
VAV/VVT Programmable Objects 19
Relationship Between Algorithm Unit Modules 20
General Tab 22
What is the General Tab? 22
Device Information 22
Network Settings 23
Global Settings 24
Local Inputs Tab 26
Setting Up a Hardwired Temperature Sensor 26
Set Up a Hardwired Temperature Sensor 26
Setting Up a Hardwired Occupancy Input 27
Set Up a Hardwired Occupancy Input 28
Setting Up a Hardwired CO2 Sensor 29
Setting Up Other Supporting Inputs 30
Set Up an Input 30
Setting Up an Airflow Sensor 31
Introduction 31
Setting Up Damper Feedback 31
Local Outputs Tab 33
Setting Up a VAV/VVT Output 33
Introduction 33
Set Up a VAV or VVT Output 33