Need help?Do you have a question about the Delta eZVP-440 and is the answer not in the manual?
General| Series | eZVP |
|---|---|
| Power Supply | 24 VDC |
| Output Type | Relay |
| Input Voltage | 24 VDC |
| Protection Class | IP20 |
| Type | Programmable Logic Controller |
| Output Current | 2A |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -25°C ~ 70°C |
| Humidity | 5% to 95% (non-condensing) |
Comparison of object type limits and capabilities between configurable and programmable models.
Custom programming using GCL, supported functions, and upgrading to programmable firmware.
Lists and explains programmable objects specific to the VAV/VVT enteliZONE algorithm.
Configuring hardwired temperature and occupancy sensors.
Setup for CO2 sensors for occupancy/ventilation and airflow sensor configuration.
Steps for configuring VAV/VVT outputs and various fan outputs.
Configuration for occupancy indicators, radiant heating, and damper outputs.
Setup for eZNS-T100 sensor functions: temperature, humidity, CO2, and occupancy.
Guides on setting up DNS-24L sensor components and button functions.
Defines setpoints for occupied/unoccupied heating/cooling and offset ranges.
To Next Page
