Setpoints Tab
Page 52 of 84 eZV-440 Application Guide
Edition 2.6
Flow Factor (FlowFactor)
This is the coefficient used to convert airflow pressure into CFM. Not available for VVT
applications.
Airflow Failure Setpoint (AirflowFailureSetpoint)
The failure setpoint for airflow pressure. Not available for VVT applications.
CoolingMinimum
The minimum cooling airflow setpoint.
CoolingMaximum
The maximum cooling airflow setpoint.
HeatingMinimum
The minimum heating airflow setpoint.
HeatingMaximum
The maximum heating airflow setpoint.
StandbyMinimum
The minimum airflow at Standby mode.
To Next Page
Loading...
