Local Inputs Tab
Page 32 of 84 eZV-440 Application Guide
Edition 2.6
If a tristate output is assigned to a damper, the algorithm will use this feedback signal rather
than a calculated damper position based on runtime.
3. In the Action/Scale Range field, select the input scale range that matches your damper
feedback signal. If you do not select a scale range, the default scale range is assumed to be
zero to full scale 0 to 100%.
4. (enteliWEB only) The Input Name field displays the object's name. You can change this
name by clearing the field and entering a new name.
To Next Page
Loading...
