Delta HOMECRAFT H26-260L User Manual

H26-260L
Sierra ingletadora
compuesta
de 10 pulgadas
SCIE A ONGLET COMBINE
254 mm
Instruction Manual
Manuel d’utilisation
Manual de instrucciones
Français (25)
Español (49)
www.DeltaMachinery.com
To reduce risk of serious injury, thoroughly read and comply with all warnings and instructions inthis manual and on product.
KEEP THIS MANUAL NEAR YOUR SAW FOR EASY REFERENCE AND TO INSTRUCT OTHERS
10-IncH compound mIter Saw
1
2
3
4
5
6
7

Delta HOMECRAFT H26-260L Specifications

General

Type	Scroll Saw
Voltage	120V
Cutting Capacity Height	2 inches
No-Load Speed	1600 SPM
Bevel Capacity	0-45 degrees

Summary

General Power Tool Safety Rules

Miter Saw Safety Rules

Power Connections

Information and warnings regarding power cord and connections.

Features

Product Specifications

Know Your Compound Miter Saw

Identification and description of the saw's main components and features.

Unpacking and Assembly

Instructions for checking contents and preparing for assembly.

Assembly

Mounting the Saw to a Stable Surface

Steps to securely mount the saw to a workbench for safe operation.

Attach Horizontal Work Clamp

Preparing Your Saw for Use

Install/Replace the Blade

Detailed procedure for installing or replacing the saw blade.

Square the Blade to the Fence

How to ensure the blade is perpendicular to the fence for accurate cuts.

Align the Blade to the Table

Procedure for aligning the saw blade parallel to the work table.

Using the Laser Guide

How to use the laser guide for precise cut alignment.

Operation

Cross Cuts

Instructions for performing straight and miter cross cuts.

Bevel Cuts

Compound Miter Cuts

Tips for Cutting and Supporting Workpieces

Adjustments

Laser Guide

Maintenance

Brush Replacement

Troubleshooting

Parts, Service or Warranty Assistance

Homecraft® Three Year Limited Warranty

Replacement Parts

Service and Repairs