Unpacking the 2-Unit PCS100HV
Use a forklift to move and place the crate containing the PCS and the wooden pallet in a designated
location. Make sure the location is clean and prepared before moving the crate.
WARNING!
The PCS and crate have a combined weight of approximately 600 kg. DO NOT attempt to lift
and/or move the package/unit by hand. The unit is extremely heavy. Attempting to move the unit
by hand may lead to injury, damage, and even possibly death.
WARNING!
Before opening the package, make sure the Tip Tell label is OK. If the Tip Tell label shows the
PCS has toppled and fell, immediately contact Delta and the Shipping Company.
1.
Use a ladder to reach the top of the PCS.
2.
Remove the screws securing the top cover.
3.
Remove the top cover.
4.
Remove the screws securing the left and right sidewalls from the shipping package.
5.
Remove the right and left sidewalls
6.
Remove the screws securing the front and rear walls from the shipping package.
7.
Remove the front and rear walls.
Figure 10. Removing All Walls 2-Unit PCS100HV
Upon unpacking the unit, inspect the unit for any signs of damages that may have been caused
during shipping. If any sign of damage is found, immediately contact Delta and the shipping
company.
To Next Page
Loading...
