Important Safety Instructions
Save these Instructions
Safety Symbols and Terminologies
Note:
Indicates additional information that is relevant to the current process or procedure.
WARNING!
Warning information appears before the text it references to emphasize that the content may
prevent damage to the device or equipment.
CAUTION!
CAUTIONS APPEAR BEFORE THE TEXT IT REFERENCES. CAUTIONS APPEAR IN CAPITAL LETTERS TO
EMPHASIZE THAT THE MESSAGE CONTAINS VITAL HEALTH AND SAFETY INFORMATION.
INFORMATION provided that when known and used will ensure optimal
operation of the system.
HIGH VOLTAGE WARNING! Indicates hazardous high voltages are present, which, if
not avoided, will result in death or serious injury. Thus, only authorized and trained
personnel should install and/or maintain this product.
Hot surface
Equipment grounding conductor (PE)
Wait for a prescribed amount of time before engaging in the indicated action.
General Safety Instructions (EN)
This manual contains important instructions for PCS that should be followed during installation and
maintenance.
PCS is designed and tested to meet all applicable International safety standards. However, like all
electrical and electronic equipment, safety precautions must be observed and followed during
installation and operation of PCS to reduce the risk of personal injury and to ensure a safe installation.
Installation, commissioning, service, and maintenance of PCS must only be performed by qualified
personnel that are licensed and/or satisfy state and local jurisdiction regulations.
Before starting installation or commissioning of the PCS, read through the entire manual and note all
DANGER! WARNING! CAUTION! and NOTICE! Statements.
All electrical installations must comply and be in accordance with all the state, local, and utility
regulations.
To Next Page
Loading...
