4 Installation
4.1 Installation Location
Do not install the unit at the location that directly expose to sunlight.
CAUTION！ Machine and equipment damage may occur
WARNING！ Death and serious injuries may occur.
● Do not install the unit near/on the flammable objects.
● Please mount the unit tightly on the solid/smooth wall.
● In order to ensure the safety of installers, installer shall be at
least two people to process the installation.
● When moving the Inverter, installer shall not stand under machines.
4.2 Mounting
This unit is a wall-mounting system. Please ensure the installation is perpendicular
and with AC plug at the bottom. Do not install the device on a slanting wall.
The dimensions of mounting bracket are shown as figure below. There are 7 pcs(RPI-
H3)/12pcs(RPI-H5) of M5 screws required for mounting plate. Fix the supplied wall-
mount plate securely on the wall before mounting the inverter to the mounting plate.
17
Installation
To Next Page
Loading...
Need help?
General
