Delta VFD-ED Series

Chapter 13 Warning Codes | VFD-ED
13-3
ID
No.
Display on
KPED-LE01
Display on KPC-CC01 Descriptions
10
oH2
Capacitor overheat warning
Cause
The temperature of the capacitor is over 65˚C.
15

PGF1
PG feedback error
Cause
When Pr.10-03 = 0 (default = 2), a warning message
displays instead of a fault message when an error
occurs.
16

PGF2
PG feedback loss warning
Cause
Pr.10-03 = 0 (default = 2), a warning message
displays instead of a fault message when an error
occurs.
17

PGF3
PG feedback stall warning
Cause
Pr.10-09 = 0 (default = 2), a warning message
displays instead of a fault message when an error
occurs.
18

PGF4
PG slip error warning
Cause
Pr.10-09 = 0 (default = 2), a warning message
displays instead of a fault message when an error
occurs.
19
PHL
PHL
Phase Loss
Warning
Phase loss
Cause
When Pr.06-01 =0 (default = 2), a warning message
displays instead of a fault message when a phase
loss occurs.
20
ot1
ot1
Over Torque 1
Warning
Over-torque 1
Cause
When Pr.06-05 =1 or 3 (default = 0), a warning
message displays instead of a fault message when
there is an over-torque detection.
21
ot2
ot2
Over Torque 2
Warning
Over-torque 2
Cause
When Pr.06-05 =1 or 3 (default = 0), a warning
message displays instead of a fault message when
there is an over-torque detection.
22
oH3
Motor overheat (PTC)
Cause
When Pr.06-26 = 0 (default = 0), a warning message
displays when there is a PTC detection.
oH2
Capacitance oH
Warning
PGF1
Warning
PGF2
Warning
PGF3
Warning
PGF4
Warning
oH3
Motor Over Heat (PTC)
Warning