Delta VFD-ED Series

Appendix C. Revision HistoryVFD-ED
C-3
Updated
Descriptions Chapters
 Pr.06-01: Updated parameter name
 Pr.06-14: Updated parameter name
 Pr.06-30: Updated parameter setting range and descriptions
 Pr.06-44: Updated drive’s output frequency upper limit
 Pr.06-45: Updated setting value Bit1=1 to "Fan lock, warn and continue
operation"
 Pr.06-46: Updated descriptions

Pr.06-79: Updated cross-reference ERV/SERV warning/fault code descriptions
Pr. Group 06

Pr.7-24 to Pr.07-27: Updated cross-reference from Pr.03-00=5, 6, 7, 8 to Pr.03-
00=7, 8, 9, 10

Pr.07-05, Pr.07-08, Pr.07-10: Updated drive’s output frequency upper limit
Pr. Group 07
 Pr.09-02: Updated setting value 1 to “Fault and ramp to stop”
 Pr.09-04: Moved partial contents in Parameter Group 09 to Appendix B. Modbus
Protocol
Pr. Group 09
Appendix B
 Pr.10-17, Pr.10-20, Pr.10-21: Updated drive’s output frequency upper limit Pr. Group 10
 Pr.11-00: Delated “speed bandwidth control enabled” for setting value Bit 0=1,
and updated text descriptions of “PI adjustment-auto gain” diagram
Pr. Group 11
 Fault code MPHL: Updated fault name and corrective actions
Pr. Group 06
Chapter 14