TT-2000 Ticket Eater™ by Deltronic Labs February 2013
Printers & Loading Paper
Star dot matrix printer
This printer is used in some older
machines. The printer is mounted on the
inside of the top door.
The printer control board (circled in photo)
has 3 LEDs. The top LED is a green
“power on” indicator. The middle LED is
a red “error” indicator. It is lit when there
is a problem such as out of paper.
The bottom LED is a green “on line”
indicator. The printer control board has
two switches. The top switch is an on-line
/ off-line toggle. The bottom switch feeds
paper.
Citizen thermal printer
Most Ticket Eaters have this printer.
The printer sits on shelf inside the
cabinet. On the side of the printer are a
paper-feed switch and an on/off toggle
switch (circled in photo). Please refer
to the printer manual for further
instruction on printer care and
functions. Refer to the next page for
paper loading instructions.
To Next Page
Loading...