TT-2000 Ticket Eater™ by Deltronic Labs February 2013
Ticket Specifications
The Ticket Eater is designed to count industry standard tickets. These tickets are 1 5/32"
wide by 2" long. They have a 1/4" diameter hole in the middle of the ticket which is
centered on the perforation between tickets. For use in ticket dispensers they will also
have a 1/4" diameter half hole on each side of the ticket at the perforation.
Barcoded and Holes-Only Tickets photographed on 1/4" grid.
The barcode on barcoded tickets is 4 digits of interleaved 2 of 5 code. This gives it 14
bars and 13 spaces. Overall dimensions of the barcode are 1” long x 1/2" wide. There
are 18 thin bars/spaces and 9 thick bars/spaces. Thin bars/spaces are 1/45" thick. Thick
bars/spaces are 3/45" thick.
The barcode bars should be printed with a dark color (black is preferred). The ink should
be dense enough that no background color shows through the bars
The barcode must be printed on both sides of the tickets.
The barcode background color should not be a dark color such as dark brown, dark blue,
dark gray, etc.
Keep the area between barcodes as clear of markings as possible. A light red sequence
number is permitted. No other color is allowed.
To Next Page
Loading...