TT-2000 Ticket Eater™ by Deltronic Labs February 2013
DL Ticket Eater Manager Software
DL Ticket Eater Manager software is the preferred way to manage your TT-2000 Ticket
Eater with AP-100 main logic board. This section of this manual covers that. Some
management functions can also be done without the software by using buttons inside the
TT-2000. The next section of this manual covers those procedures.
DL Ticket Eater Manager software requires Windows XP or later.
The software uses USB 2.0 to connect to the ticket eater. (USB 1.x is not supported.) To
make this connection:
1. Open the top door of the Ticket Eater .
2. Pull out the safety switch. This turns the Ticket Eater on with the door open. The
red and green LED’s on the main logic board should be on.
3. Connect a USB cable between the computer and the USB jack on the main logic
board.
4. Use the software to configure and manage the Ticket Eater.
The software has various entries organized into 5 tabs (circled in black). The toolbar
(circled in white) has two buttons for opening and saving configuration files, two buttons
for transferring configurations between the software and the Ticket Eater, and five
buttons for controlling the Ticket Eater.
To Next Page
Loading...