D1000 Installation and Service Manual 36
Home LAB-110073 Rev. 3
D1000 COMMON PARTS LIST
Model Description
D1030-F
30-Inch-Wide - Front Vented, Recirculating Design, 18 GA, 304 Stainless Steel Hood with Internal Fan, PLC Environmental Monitoring & Fire
Suppression System
D1030-R
30-Inch-Wide - Rear Vented, Rear Duct Connection, 18 GA, 304 Stainless Steel Hood with Internal Fan, PLC Environmental Monitoring & Fire
Suppression System
D1030-D***
30-Inch-Wide - Top Vented, Vertical Duct Connection, 18 GA, 304 Stainless Steel Hood with External Fan, PLC Environmental Monitoring &
Fire Suppression System
D1036-F
36-Inch-Wide - Front Vented, Recirculating Design, 18 GA, 304 Stainless Steel Hood with Internal Fan, PLC Environmental Monitoring & Fire
Suppression System
D1036-R
36-Inch-Wide - Rear Vented, Rear Duct Connection, 18 GA, 304 Stainless Steel Hood with Internal Fan, PLC Environmental Monitoring & Fire
Suppression System
D1036-D***
36-Inch-Wide - Top Vented, Vertical Duct Connection, 18GA, 304 Stainless Steel Hood with External Fan, PLC Environmental Monitoring &
Fire Suppression System
⚠External Fan for “D1000-D” Ducted Models and NFPA upgrades
IF D1000 Only – 10” Inline Fan and 35 Foot Cable
WF D1000 Only – Exterior Wall Mount Fan with 35 Foot Cable
RF D1000 Only – Roof Mounted Fan with 50 Foot Cable
F (R)-NFPA D1000-F (R) - Upgrade to NFPA Life Safety Code with Internal Fan
IF-NFPA D1000-D-IF – 12” Inline Fan and 35 Foot Cable with Upgrade to NFPA Life Safety Code
WF-NFPA D1000-D-WF – Exterior Wall Mount Fan with 35 Foot Cable with Upgrade to NFPA Life Safety Code
RF-NFPA D1000-D-RF – Roof Mounted Fan with 50 Foot Cable with Upgrade to NFPA Life Safety Code
Range Element Disconnect
D1000-E Electrical Disconnect Box * [required - which NEMA is needed, 120V 5-15, 5-20, 220V 6-20 or 14-50]
D1000-G 3/4” NPT Solenoid Gas Valve 120VAC
D1000-DED
Dual Element Disconnect Integrated 'E' and 'G' * [required if electric Igniters need to be powered] [required - which NEMA is needed, 120V 5-
15, 5-20, 220V 6-20 or 14-50]
D1000-DRD Dual Receptacle Disconnect 2-120VAC (5-15 or 5-20) or 2 -220VAC (6-20) Receptacles * [required - which NEMA is needed?]
Optional Components
CLBX The “ClockBox” - password protected, range element time out system
D1000-ADA Handicap Accessible Control Box Includes wiring harness, light and fan controls
D1000-MPK Manual Pull Kit, Face Plate, 3 Elbows, 25 Foot Cable
D1000-LSC
Limiting speed control module to limit maximum CFM’s exerted by the fan
D1000-FBO Control Module to allow the use of a fan not provided by DFP, see data sheet for details
D1000-MACM Make-up Air Control Module External to energize a separate Make-Up Fan (not provided), limited to 10 Amps
D1000-STROBE Horn & Strobe Light, designed to be used in conjunction with the D1000
D103X-TC-D Top Cover for D1030/D1036 Ducted “D” Models
D103X-TC-F (R) Front / Rear Vented Top Cover for D1030/D1036 Model (not compatible with NFPA101)
Test Kits & Spare Parts
D1000-TANK-FC D1000 Replacement Kit Tank Assembly, Fully Charged [cannot ship via Air]
D1000-TANK-
TEST
D1000 Test Kit Tank Assembly, Nitrogen only with Adapter & Test Link [cannot ship via Air]
D1000-TANK-SA D1000 Replacement Kit Tank Assembly with Suppression Agent with Adapter but unpressurized [requires Nitrogen charge]
D1000-TANK-E D1000 Replacement Kit Tank Assembly without Suppression Agent with Adapter / Unpressurized [requires Nitrogen charge]
D1000-TEST-KIT D1000 Test Kit (Set of 2 Test Links, 5 Nozzle Caps and 1 Safety Key & Pin)
D103x-ASK D1030= 212 ⁰F or D1036=280⁰F- Annual Service Kit (3 Links & 1 Service Tag)
To Next Page
Loading...
