Denon AVR-1404 Operating Instructions

ENGLISH
Before setting up the system
1 Check that all the components are correct, then press the POWER operation switch on the main unit or
ON/ STANDBY ‘
oN Suite the POWER button on the remote control unit to turn on the power.
(Main unit) {Remote control unit)
2 ara Press the SYSTEM SETUP button to enter the setting.
SETUP
NOTE: Please make sure the “AUDIO” position of the slide switch on the remote control unit.
Press the ENTER or <> (down) button to switch to the speaker configuration set up.
NOTE:
Press the SYSTEM SETUP button again to finish system set up. System set up can be finished at any time. The changes to the settings
made up to that point are entered.
PoY-vad (ate Maat-my ol-r-] <laerelaicelele-talelal
1 Use the 8 (left) and § (right) buttons to select your front speaker type.
(Initial)
L FRONT LARGE =p
ey (left) button (right) button
S mS \ Press the ENTER or <= (down) button to switch to the center speaker setting.
F
2
(
a
Use
the
8
(left)
and
§)
(right)
buttons
to
select
your
center
speaker
type.
(Initial)
Cre oy
(left) button (right) button
Press the ENTER or <® (down) button to switch to the surround speaker setting.
NOTE:
¢ When “Small” has been selected for the front speakers, “Large” cannot be selected for the center speaker.
Use the g (left) and §) {right) buttons to select your surround speaker type.
(Initial)
G—
(left) button (right) button
Press the ENTER or <> (down) button to switch to the subwoofer setting.
17

Denon AVR-1404 Specifications

General

Brand	Denon
Model	AVR-1404
Category	Stereo Receiver
Language	English