Denon AVR-1404 Operating Instructions

ENGLISH
LAST FUNCTION MEMORY
This
unit
is
equipped
with
a
last
function
memory
which
stores
the
input
and
output
setting
conditions
as
they
were
immediately
before
the
power
is
switched
off.
*
The
unit
is
also
equipped
with
a
back-up
memory.
This
function
provides
approximately
one
week
of
memory
storage
when
the
main
unit's
power
switch
is
off
and with
the
power
cord disconnected.
INITIALIZATION OF THE MICROPROCESSOR
When the indication of the display is not normal or when the operation of the unit does not shows the reasonable result, the initialization of the
microprocessor is required by the following procedure.
1 Switch off the unit and remove the AC cord from the wall
outlet.
2 Hold the following SPEAKER A button and B button, and plug
the AC cord into the outlet.
Check that the entire display is flashing with an interval of
about 1 second, and release your fingers from the 2 buttons
and the microprocessor will be initialized.
NOTES:
¢ If step 3 does not work, start over from step 1.
e If the microprocessor has been reset, all the button settings are
reset to the default values (the values set upon shipment from
the factory).
45

Denon AVR-1404 Specifications

General

Brand	Denon
Model	AVR-1404
Category	Stereo Receiver
Language	English