Denon AVR-1404 Operating Instructions

[11] REMOTE CONTROL UNIT
Oyey-1e-talarem l= LO) \M-relsivemrolaal exelat-valey
¢ Turn on the power of the different components before operating them.
1
Set mode switch 1 to “AUDIO”.
AUDIO e———_
@ VIDEO —
Set mode switch 2 to the position for the component to be
operated. (CD, CDR/MD or Tape deck)
CDR/ MD: TAPE
aM
DVD/VDP—e ¢ | eh
VCR: ‘OBS /CABLE
in mn
ENGLISH
3
Operate the audio component.
¢ For details, refer to the component's operating instructions.
* While this remote control is compatible with a wide range of infrared controlled components, some models of components may not
be operated with this remote control.
1.CD player (CD) and CD recorder and MD recorder
(CDR/MD) system buttons
cuipnatiain
<<, > © Manual search (forward and reverse)
Z : Stop
> : Play
\<<4, mI Auto search (cue)
il : Pause
DISC : Switch discs
SKIP+ (for CD changers only)
3. Tuner system buttons
S|
sl
E
3
2
CIO
= 5 2
eH® ©) ©
NOTE:
2. Tape deck (TAPE) system buttons
avey4
AB
O MUTING
SHIDO ALIAIN,
: Rewind
: Fast-forward
: Stop
: Forward play
: Reverse play
: Switch between decks A and B
: Switch preset channel range
: Switch between the AM and FM bands
: Switch between auto and mono
SHIFT
CHANNEL: Preset channel
+,- up/down
TUNING — : Frequency
a= up/down
BAND
MODE
MEMORY : Preset memory
¢ TUNER can be operated when the switch is at “AUDIO” position.
21

Denon AVR-1404 Specifications

General

Brand	Denon
Model	AVR-1404
Category	Stereo Receiver
Language	English