Denon AVR-1404 Operating Instructions

ENGLISH
Setting the Digital In assignment
input the type of components connected to the digital input terminals.
1 Q an Use the 8 (left) and § (right) buttons to assign the input function connected to the COAXIAL input (COAXIAL)
terminal.
(Initial)
=
(left) button (right) button
e Select “OFF” if nothing is connected.
Press the ENTER or <> (down) button to switch the optical input (OPT) setting.
Use
the
8
(left)
and
§
(right)
buttons
to
assign
the
input
function
connected
to
the
OPTICAL
input
(OPTICAL)
terminal.
(Initial)
-
(left) button (right) button
¢ Select “OFF” if nothing is connected.
Press the ENTER or <> (down) button if you want to start the settings over from the beginning.
NOTE:
e TUNER cannot be selected.
After setting up the system
1
syste
Press
the
SYSTEM
SETUP
button
to
finish
system
set
up.
SETUP
This
completes
the
system
setup
operations.
Once
the
system
is
set
up,
there
is
no
need
to
make
the
settings
again
unless
other
components
or
speakers are
connected
to
or
the speaker
layout
is
changed.
20

Denon AVR-1404 Specifications

General

Brand	Denon
Model	AVR-1404
Category	Stereo Receiver
Language	English