Denon AVR-1404 Operating Instructions

ENGLISH
PNT com allal ire]
1 Set the input source to “TUNER”.
INPUT SELECTOR TUNER
{Main unit) (Remote control unit)
2 Watching the display, press the BAND button to select the
desired band (AM or FM).
BAND BAND
Tes (Main unit) (Remote control unit)
3 Press the MODE button to set the auto tuning mode.
© CO)
(Remote control unit)
4 Press the TUNING A (+) or V (-) button.
TUNING/
TV VOL
TUNING
©) ll ©
(Main unit) (Remote control unit)
e Automatic searching begins, then stops when a station is
tuned in.
NOTE:
¢ When in the auto tuning mode on the FM band, the “STEREO”
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the “TUNED” and
“STEREO” indicators turn off.
WiETAEE Lalit late,
Set the input function to “TUNER”. Press the MODE button to set the manual tuning mode.
1 Check that the display’s “AUTO” indicator turns off.
2 Watching the display, press the BAND button to select the 4 Press the TUNING A (+) or V (-) button to tune in the desired
desired band (AM or FM). station.
The frequency changes continuously when the button is held
in.
NOTE:
e When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.
43

Denon AVR-1404 Specifications

General

Brand	Denon
Model	AVR-1404
Category	Stereo Receiver
Language	English