Denon AVR-1404 - Page 50

ENGLISH
SPECIFICATIONS
™@ Audio section
¢ Power amplifier
Rated output:
Output terminals:
e Analog
Input sensitivity / input impedance:
Frequency response:
S/N ratio:
BH Video section
¢ Standard video jacks
Input / output level and impedance:
Frequency response:
© §-video jacks
Input / output level and impedance:
Frequency response:
@ Tuner section
Receiving range:
Usable sensitivity:
50 dB quieting sensitivity:
S/N ratio:
Total harmonic distortion:
Mm General
Power supply:
Power consumption:
Maximum external dimensions:
Mass:
@ Remote control unit (RC-942)
Batteries:
External dimensions:
Mass:
Front: 75W+75W
(8 Q/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110W+110W_ (6 Q/ohms, 1 kHz with 0.7% T.H.D.)
Center: 75W
(8 Q/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W (6 Q/ohms, 1 kHz with 0.7% T.H.D.)
Surround: 75W+75W
(8 Q/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W+110W (6 Q/ohms, 1 kHz with 0.7% T.H.D.}
Front: AorB 6 to 16 Q/ohms
A+B 12 to 16 Q/ohms
Center/Surround: 6 to 16 Q/ohms
200 mV / 47 kQ/kohms
10 Hz ~ 100 kHz: +1, -3 dB (TONE DEFEAT ON)
98 dB (IHF-A weighted) (TONE DEFEAT ON)
1 Vp-p, 75 Q/ohms
5 Hz~ 10 MHz — +1,-3 dB
Y signal — 1 Vp-p, 75 Q/ohms
C signal — 0.286 Vp-p, 75 Q/ohms
5 Hz~ 10 MHz — +1,-3 dB
[FM] (note: pV at 75 Q/ohms, 0 dBf = 1 x 10-15 W)
87.50 MHz ~ 107.90 MHz
1.0 pV (11.2 dBf)
MONO 1.6 uV (15.3 dBf)
STEREO 23 pV (38.5 aBf)
MONO 80 dB (IHF-A weighted)
STEREO 75 dB (IHF-A weighted)
MONO 0.15% (1kHz)
STEREO 0.3% (1kHz)
AC 120 V, 60 Hz
3.8A
[AM]
520 kHz ~ 1710 kHz
18 pV
434 (W) x 147 (H) x 417 (D) mm (17-3/82” x 5-25/32” x 1-23/64”)
10.3 kg (22 Ibs 11.3 02)
R6P/AA Type (two batteries)
55 (W) x 225 (H) x 34.5 (D) mm (2-11/64” x 8-55/64” x 1-9/64”)
165 g (Approx. 5.8 oz) {including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
50