To Next PageTo Next PageWhy are the instrument positions reversed during stereo playback on my Denon AVR-1404?
If the instrument positions are reversed during stereo playback on your Denon Stereo Receiver, it's probably due to reversed connections of the left and right speakers or the left and right input/output cords. Double-check and correct the left and right connections.
General| Channels | 5.1 |
|---|---|
| Type | AV Receiver |
| Total Harmonic Distortion (THD) | 0.08% |
| Frequency Response | 20 Hz - 20 kHz |
| Input Sensitivity/Impedance | 200 mV / 47 k ohms |
| Signal-to-Noise Ratio | 98 dB |
| HDMI Inputs | 3 |
| HDMI Output | 1 |
| Power Output (per channel) | 75W (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Digital audio input | Optical, Coaxial |
| Tuner Frequency Range | FM: 87.5 - 108 MHz, AM: 522 - 1611 kHz |
Check leakage current or line to chassis resistance before returning unit to customer.
Important notes for service: avoid shock, use specified parts, proper assembly, post-service checks.
Details on safety critical parts and how they are marked in diagrams and parts lists.
Procedure to remove the top cover by unscrewing it.
Procedures for FM and AM alignment, including connection diagrams and tables.
Detailed steps for measuring and adjusting idling current for audio channels.
