32
ENGLISH
TP search
Use this function to find RDS stations broadcasting traffic program (TP stations).
1
Set the input source to “TUNER”.
2
Press the RDS button until “TP SEARCH”
appears on the display.
(Main unit) (Remote control unit)
(Main unit)
3
Press the PRESET • (+) or ª (–) button TP
search begins.
If no TP station is found with above operation,
all the reception bands are searched.
(Main unit) (Remote control unit)
4
The station name is displayed on the display
after searching stops.
5
To continue searching, repeat step 3.
If no other TP station is found when all the
frequencies are searched, “NO PROGRAMME”
is displayed.
PTY search
Use this function to find RDS stations broadcasting a designated program type (PTY).
For a description of each program type, refer to “Program Type (PTY)”.
1
Set the input source to “TUNER”.
2
Press the RDS button until “PTY SEARCH”
appears on the display.
(Main unit) (Remote control unit)
(Main unit)
3
Watching the display, press the PTY button to
call out the desired program type.
(Main unit)
4
Press the PRESET • (+) or ª (–) button to
automatically begin the PTY search operation.
If there is no station broadcasting the
designated program type with above operation,
all the reception bands are searched.
(Main unit) (Remote control unit)
5
The station name is displayed on the display
after searching stops.
6
To continue searching, repeat step 4.
If no other station broadcasting the designated
program type is found when all the frequencies
are searched, “NO PROGRAMME” is displayed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
