Denon AVR-1804 Operating Instructions

31
Preset stations
Preparations:
Use the “Auto tuning” or “Manual tuning” operation
to tune in the station to be preset in the memory.
1
Press the MEMORY button.
2
Press the SHIFT button and select the desired
memory block (A to E).
4
Press the MEMORY button
again to store the station in
the preset memory.
To preset other channels, repeat steps 1 to 4.
A total of 40 broadcast stations can be preset – 8
stations (channels 1 to 8) in each of blocks A to E.
3
Press the PRESET D or H button to select the
desired preset channel (1 to 8).
NOTE:
• Please make sure the “AUDIO” position of
the slide switch on the remote control unit.
32
1, 4
3
2
Checking the preset stations
1
1
Press the ON SCREEN/DISPLAY button repeatedly until the “Tuner Preset
Stations” screen appears on the OSD.
(Remote control unit)
(Remote control unit)
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Remote control unit)
• The preset (broadcast) stations can be checked on the on screen display (OSD).
Recalling preset stations
21
2
1
NOTE:
• Please make sure the “AUDIO” position of
the slide switch on the remote control unit.
1
Watching the display, press the SHIFT button to
select the preset memory block.
2
Watching the display, press the PRESET D or H
button to select the desired preset channel.
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
ENGLISH

Denon AVR-1804 Specifications

General

Tuner	AM/FM
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	100 dB
Total Harmonic Distortion	0.08%
Input Impedance	47 kOhm
Input Sensitivity	200 mV
Surround Sound	Dolby Digital, DTS, Dolby Pro Logic II
Connector Type	RCA
Dimensions	434 x 168 x 391 mm