Denon AVR-2106 - Service Manual

Other manuals for Denon AVR-2106

Operating Instructions72 pages

Brochure & Specs2 pages

Instrucciones De Operación63 pages

Control Protocol15 pages

Questions and Answers

K
Kristin BrockSep 16, 2025
Why is the power indicator flashing rapidly on my Denon AVR-2106 Stereo Receiver?
- F
  Francisco Edwards MDSep 16, 2025
  If the display is not lit and the power indicator is flashing rapidly on your Denon Stereo Receiver, it could be due to a short circuit in the speaker terminals or blocked ventilation holes. Switch the power off, ensure the speakers are properly connected, and ventilate the unit well to allow it to cool down. It may also happen if the unit is operating at continuous high power conditions and/or with inadequate ventilation, so ensure proper ventilation to cool down the unit.
L
Laurie KnightSep 17, 2025
How to fix sound only coming from one channel on my Denon AVR-2106?
- N
  Nathan RamosSep 18, 2025
  If sound is only coming from one channel on your Denon Stereo Receiver, check the speaker cables and input/output cables to ensure they are securely connected.
C
calvin21Sep 18, 2025
Why is my Denon Stereo Receiver making a howling noise at high volume?
- S
  Sharon MackSep 18, 2025
  If you are experiencing a howling noise when the volume is high on your Denon Stereo Receiver, it might be because the speaker systems are too close together. Try separating them as much as possible. If the floor is unstable and vibrates easily, use cushions to absorb speaker vibrations.
A
Ann ReidSep 19, 2025
What causes distorted sound on my Denon Stereo Receiver?
- S
  Sheila ThompsonSep 19, 2025
  If the sound from your Denon Stereo Receiver is distorted, it could be due to weak stylus pressure. Apply proper stylus pressure. It may also be caused by dust or dirt on the stylus, so check the stylus.
M
Melinda LeeSep 23, 2025
What does “NO SIGNAL” mean on my Denon Stereo Receiver?
- M
  Mr. Adam WilliamsSep 23, 2025
  If “NO SIGNAL” is displayed on your Denon Stereo Receiver, it means the signal cannot be received. Try repositioning your XM Connect-and-Play antenna.
A
anthony31Sep 23, 2025
What does “CHECK ANTENNA” mean on my Denon Stereo Receiver display?
- T
  Teresa RodriguezSep 23, 2025
  If “CHECK ANTENNA” is displayed on your Denon Stereo Receiver, the AVR-2106’s XM terminal and the XM Connect-and-Play antenna is not properly connected. Check that the connections are correct.
A
andrea59Sep 23, 2025
What does “OFF AIR” mean on my Denon AVR-2106?
- H
  Hannah PayneSep 23, 2025
  If “OFF AIR” is displayed on your Denon Stereo Receiver, it means the selected channel is not currently broadcasting. Select another channel.
K
Kimberly BenjaminAug 31, 2025
Why is the display not lit and power indicator flashing rapidly on my Denon Stereo Receiver?
- R
  richardmckenzieAug 31, 2025
  If your Denon Stereo Receiver display isn't lit and no sound is produced, and the power indicator is flashing rapidly, it could be due to: * Short-circuited speaker terminals: Switch the power off, connect the speakers properly, and then switch the power back on. * Blocked ventilation holes: Turn off the power, ventilate the unit well, and allow it to cool down before turning it back on. * Continuous high power operation with inadequate ventilation: Turn off the power, ventilate it well, and allow it to cool down before turning it back on.
G
gabrielle84Aug 25, 2025
What to do if my Denon Stereo Receiver has display but no sound?
- J
  Joanna WilsonAug 25, 2025
  If you're not getting any sound from your Denon Stereo Receiver, even though the display is lit, check the following: * Make sure the speaker cables are securely connected. * Ensure the FUNCTION knob is set to a suitable position. * Turn up the volume control to a suitable level. * Switch off MUTING, if it's on. * If you've selected a digital input, ensure digital signals are being input or select the correct input terminals.
B
Bryce JohnsonAug 25, 2025
What to do if my Denon Stereo Receiver display is lit but there is no sound?
- R
  Richard JohnsonAug 26, 2025
  If your Denon Stereo Receiver's display is lit but no sound is coming out, there could be several reasons. First, ensure the speaker cables are securely connected. Next, check the FUNCTION knob to make sure it is set correctly. Also, verify that the volume control isn't set to the minimum. Another possibility is that MUTING is activated, so switch it off. Finally, if you've selected a digital input, ensure digital signals are being input to the correct terminals.

Denon AVR-2106 Specifications

Audio Specifications

front rated output	90 W + 90 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
center rated output	90 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
surround rated output	90 W + 90 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
surround back rated output	90 W + 90 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
dynamic power	120 W x 2 ch (8 Ω/ohms)
analog input sensitivity	200 mV / 47 kΩ/kohms
frequency response	10 Hz ~ 100 kHz: +1, –3 dB (DIRECT mode)
analog distortion	0.008 % (20 Hz ~ 20 kHz) (DIRECT mode)
phono input sensitivity	2.5 mV
phono RIAA deviation	±1 dB (20 Hz to 20 kHz)
phono S/N	74 dB (A weighting, with 5 mV input)
phono rated output	150 mV / 7 V
phono distortion factor	0.03 % (1 kHz, 3 V)

Video Specifications

standard video input/output level	1 Vp-p, 75 Ω/ohms
standard video frequency response	5 Hz ~ 10 MHz — +1, –3 dB
S-Video input/output level	Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
S-Video frequency response	5 Hz ~ 10 MHz — +1, –3 dB
color component video input/output level	Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
color component video frequency response	DC ~ 100 MHz — +0, –3 dB

Tuner Specifications

receiving range	87.50 MHz ~ 108.00 MHz 522 kHz ~ 1611 kHz
usable sensitivity	1.0 µV (11.2 dBf) 18 µV
50 dB quieting sensitivity	MONO 1.6 µV (15.3 dBf)
S/N MONO	77 dB (IHF-A weighted)
total harmonic distortion MONO	0.15 % (1 kHz)
total harmonic distortion STEREO	0.3 % (1 kHz)

General Specifications