Denon AVR-2311CI User Manual

76
ENGLISH
Surround
Surround mode (vpage28)
Surround Parameter (vpage52)
Tone
z15
(vpage53)
Audyssey Settings
z20
(vpage54)
RESTORER
z19
(vpage56)
AFDM
z12
(vpage52)
S.Back
(vpage53)
F.Height
z13
(vpage53)
Height Gain
(vpage53)
Subwoofer
(vpage53)
PRO LOGIC g/gx Music mode only
NEO:6 Music
mode only
Panorama
(vpage52)
Dimension
(vpage52)
C.Width
(vpage52)
C.Image
(vpage52)
MultEQ
®
(vpage54)
Dynamic EQ
®
z17
(vpage54)
Dynamic
Volume
®
z18
(vpage55)
PURE DIRECT
S
z3
DIRECT (2 channel)
S
z3
DIRECT (Multi-channel)
STEREO
SSSSS
MULTI CH IN
SSS
S
z14
SSSS
DOLBY PRO LOGIC gz SS SSSSS
DOLBY PRO LOGIC gx S SSS SSSSS
DOLBY PRO LOGIC g SS SSS SSSSS
DTS NEO:6
S SSSSSS
DOLBY DIGITAL
SSSS
z14
SSSS
DOLBY DIGITAL Plus
SSSS
z14
SSSS
DOLBY TrueHD
SSSS
z14
SSSS
DTS SURROUND
SSSS
z14
SSSS
DTS 96/24
SSSS
z14
SSSS
DTS-HD
SSSS
z14
SSSS
DTS Express
SSSS
z14
SSSS
MULTI CH STEREO
SS SSSSS
ROCK ARENA
SS S
z16
SSSS
JAZZ CLUB
SS SSSSS
MONO MOVIE
SS SSSSS
VIDEO GAME
SS SSSSS
MATRIX
SS SSSSS
VIRTUAL
SSSSS
z3 Only when “SW Mode” is set to “LFE+Main” (vpage58), sound is output from the subwoofer.
z12 This item can be selected when a Dolby Digital or DTS or DVD-Audio signal is played.
z13 If “Speaker Config.” – “F.Height” (vpage58) is set to “None”, this item cannot be selected.
z14 This item can be selected when “Surround Parameter” – “F.Height” (vpage53) is set to “ON”.
z15 This item cannot be set when “Dynamic EQ” (vpage54) is set to “ON”.
z16
In this surround mode, bass is +6 dB, and treble is +4 dB. (Default)
z17 This item cannot be set when “MultEQ” (vpage54) is set to “OFF” or “Manual”.
z18 This item cannot be set when “Dynamic EQ” (vpage54) is set to “OFF”.
z19 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z20 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.

Denon AVR-2311CI Specifications

General

Brand	Denon
Model	AVR-2311CI
Category	Stereo Receiver
Language	English