PageDefault settingsItems
44
PageDefault settingsItems
Advanced Setup – Part 1 Advanced Setup – Part 1
4. Video Setup
2
Component
In Assign
HDMI In
Assign
DVD VDP TV
1
50
3
Video
Convert
ON
50
49, 50
DBS VCR-1 VCR-2 V.AUX
1-RCA NONE 2-RCA 3-RCA NONE NONE NONE
Audio Delay5
0 ms
51
On Screen
Display
6
Function/Mode = ON
Master Volume = ON
Mode = Mode 1
52
DVD VDP TV DBS VCR-1 VCR-2 V.AUX
NONE
NONE NONE NONE
NONE
NONE
NONE
4
HDMI Out
Setup
Convert = ON
i/p Convert = ON
Color Space = Y Cb Cr
RGB Mode = Normal
51
3. Audio Input Setup
47
Digital In
Assign
Input
source
Digital
Inputs
CD DVD VDP TV DBS VCR-1 VCR-2
COAX 1 COAX 2 OPT 1 OFF OPT 2 OPT 3 OFF
1
CDR /
TAPE
OPT 4
V.AUX
OPT 5
2
EXT. IN
Subwoofer
Level
SW Level = +15 dB
48
Input
Function Lev.
TUNER PHONO CD
CDR /
TAPE
DVD VDP TV
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
4
VCR-2
0 dB
DBS VCR-1
0 dB 0 dB
V.AUX
0 dB
5
Function
Rename
48
6
Tuner
Presets
A1 ~ A8
B1 ~ B8
C1 ~ C8
D1 ~ D8
E1 ~ E8
87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
Auto Preset
Memory
F1 ~ F8
G1 ~ G8
90.1 MHz
90.1 MHz
Preset Skip
Preset
Name
48
All preset channels = ON
49
–
49
47
TUNER PHONO CD
CDR /
TAPE
DVD VDP TV VCR-2DBS VCR-1 V.AUX
iPod Assign
It is possible to assign the DENON original Dock’s audio
and/or video signals to any input terminals on the AVR-2807
and play them.
iPod Function = OFF
473
This assigns the digital input terminals for the
different input sources.
Sets the playback level of the analog signal that was input to
the EXT. IN subwoofer terminal.
Up to 56 FM stations can be preset
automatically.
The playback level is corrected individually for the different
input sources.
The name of the input function that is displayed can be
changed.
Preset channels that are not used often can
be skipped.
The preset channels can be given the names
you want.
The HDMI input terminals are assigned for the different
input sources.
Select the HDMI audio signal playback method.
This assigns the component video input terminals for the
different input sources.
This sets whether or not to use the video conversion
function.
Set whether or not to up-convert from analog video signals
to HDMI. When this function is used, the format of the
signal output from the HDMI terminal can be set.
Adjust the time delay between the video and audio signals.
Set whether or not to display the on screen display for
indications other than the menu screens.
To Next Page
Loading...
Need help?
General
