34
Learning function
If your AV component is not a Denon product or if it cannot be operated using the preset memory, it can be controlled with the included remote
control unit by storing its remote control signals in the remote control unit.
1
2
3
456
789
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT
RC-883
ON /
SOURCE
TUNER
VDP
VCR-1 VCR-2/V.AUX
DVD
TV/DBS
CDR/TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.INMODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
1, 5, 8
3, 4
2, 3, 4
Press the power ON/SOURCE button and the OFF button
simultaneously.
• “SET UP” appears on the remote control unit’s display.
2
Use the D and H cursor buttons to display “LEARN” on the
remote control unit’s display, then press the ENTER button.
• “SEL MODE” is displayed.
4
Use the D and H cursor buttons to select the mode for the
button to be “learned”, then press the ENTER button.
• “SELECT KEY” is displayed.
5
Press the button to be “learned” while “SELECT KEY” is
displayed. “NOW LEARN” appears.
• “NOT VALID” is displayed if a button that cannot be
“learned” is pressed.
• To cancel, press the power ON/SOURCE button and the
OFF button simultaneously.
6
Point the remote control units directly at each other and press
and hold in the button on the other remote control unit which
you want to “learn”.
7
“COMPLETE” appears on the remote control unit’s display
and learning is completed.
• “SELECT KEY” is displayed. Other keys can be “learned”
by repeating steps 5 to 7.
8
To cancel the learning mode, press the power ON/SOURCE
button and the OFF button simultaneously again.
Registering is not possible in the receiver mode.
Other remote
control unit
To Next Page
Loading...
Need help?
General
