Denon AVR-3805

61
(2) Resetting “learned” buttons
1
2
Press the power ON button and the OFF button at the same
time.
Press the “6” button to select resetting.
Press the “2” button to resetting the “learned” buttons
3
4
The mode buttons will all light.
5
Press the mode button you want to resetting, then press the
ENTER button.
The set returns to the normal operating mode.
(3) Resetting the system call buttons
1
2
Press the power ON button and the OFF button at the same
time.
Press the “6” button to select resetting.
Press the “3” button to resetting.the system call buttons.
3
4
All buttons of System Call will light.
5
Press the button you want to resetting, then press the ENTER
button.
The set returns to the normal operating mode.
(4) Resetting the punch through setting
1
2
Press the power ON button and the OFF button at the same
time.
Press the “6” button to select resetting.
Press the “4” button to resetting the “punch through”setting.
3
4
All punched through mode buttons will light.
5
Press the mode button you want to resetting, then press the
ENTER button.
The set returns to the normal operating mode.
(5) All reset function
1
2
Press the power ON button and the OFF button at the same
time.
Press the “6” button to select resetting.
Press the “+10” button to resetting, all the settings (factory
defaults).
• The set returns to the normal operating mode after
approximately 20 seconds.
3