Denon AVR-4802R - THX Surround EX; Home THX Cinema Mode

59
[1] Playing sources recorded in Dolby Surround in the Home THX Cinema surround mode
1
q Select the program source.
INPUT SELECTOR
(Main unit) (Remote control unit)
3
Play a program source with the mark.
• For operating instructions, refer to the manuals of the
respective components.
THX Surround EX / Home THX Cinema mode
When the HOME THX CINEMA button is pressed, the surround mode is set as follows according to the signal that is played:
q THX Surround EX (THX Ultra2 Cinema)
w Home THX CINEMA
e THX 5.1
r THX DSCRT 6.1, THX MTRX 6.1
When the HOME THX CINEMA mode is set when a DVD is played, check the DVD player’s digital output setting and change the setting to one
for which Dolby Digital and DTS bit stream signals can be output (“bit stream”, for example).
2 5, 6 71-w
1-q
4
1-q
1-w
2
6, 7
5
4
w Set the input mode to “AUTO”.
INPUT MODE
(Main unit) (Remote control unit)
2
Select the Home THX mode.
HOME
THX CINEMA
(Main unit) (Remote control unit)
4
Adjust the volume.
MASTER VOLUME
(Main unit) (Remote control unit)
5
Display the Surround Parameter screen and set the parameters according to the source.
SURROUND
PARAMETER
(Main unit) (Remote control unit)
7
Select the setting.
SELECT
(Main unit) (Remote control unit)
6
Select the parameter.
SURROUND
PARAMETER
(Main unit) (Remote control unit)