Denon AVR-4802R - Checking the Preset Stations

74
Checking the preset stations
1
Use the “Auto tuning” or “Manual tuning” operation to tune
in the station to be preset in the memory.
2
Press the MEMORY button.
3
4
5
Press the MEMORY button again
to store the station in the preset
memory.
To preset other channels, repeat steps 2 to 5.
A total of 40 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to E.
• The preset (broadcast) stations can be checked on the on screen display.
1
Press the ON SCREEN/DISPLAY button repeatedly until the “Tuner Preset Stations” screen appears
on the OSD.
Preset memory
1
AMP
2, 5
3
4
(Remote control unit)
(Remote control unit)
(Remote control unit)
Main unit:
Press the TUNER PRESET button.
Remote control unit:
Press the SHIFT button and select the desired memory block
(A to E).
TUNING
PRESET
(Main unit) (Remote control unit)
Main unit:
Select the desired preset channel (1 to 8).
Remote control unit:
Press the CHANNEL + (up) or – (down) button to select the
desired preset channel (1 to 8).
SELECT
(Main unit) (Remote control unit)
4 3