• Use this to turn the on-screen display {messages other than the menu screens) on or off.
1
2
At the System Setup Menu select "On Screen Display".
System Setup Menu
Speaker Configuration
SB CH Auto Flag Detect
Delay Time
Channel Level
Digital In Assignment
DOn Screen Display
Auto Tuner Presets
Switch to the On Screen Display screen.
On Screen Display
_4:_[_
Select "ON" or "OFF".
% Enter the setting.
The System Setup Menu reappears.
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels A1 to 8, B1 to 8, C1 to 8, D1 to 8 and E1 to 8.
NOTE:
• if an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to tune in the station, then preset it
using the manual "Preset memory" operation.
1
Use the CURSOR buttons to specify "Auto Tuner Presets" from the
"System Setup Menu" screen.
System Setup Menu
Speaker Configuration
SB OH Auto Flag Detect
Delay Time
Channel Level
Digital In Assignment
On Screen Display
_Auto Tuner Presets
2
Press the ENTER button.
The "Auto Preset Memory" screen appears.
Auto Preset Memory
Auto Tuning &
_reset Station Memory
Storing Preset Memory
_Stert _4
Use the CURSOR button to select "Yes".
"Search" flashes on the screen and searching begins.
"Completed" appears once searching is completed.
The display automatically switches to screen.
This completes system setup. Once these settings are made, there is no need to change them unless different AV components are connected
or the speakers are repositioned.
To Next Page
Loading...
Need help?
General
