• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL and SR) together. Use it for
example to adjust the balance of the sound from the different positions when @aying multi-channel music sources.
Select "FADER".
CH VOL
(Main unit) (Remote control unit)
The channel switches in the order shown below each time
this button is pressed.
When the surround back speaker setting is set to "2spkrs"
for "Speaker Configuration", this is set to "SBR", "SBL".
Press the _ button to reduce the volume of the front
channels, the _] button to reduce the volume of the rear
channels.
_0 _sELEcT
(Main unit) (Remote control unit)
• The channel whose channel level is adjusted lowest can be faded
to -12 dB using the fader function.
• if the channel levels are adjusted separately after adjusting the
fader, the fader adjustment values are cleared so adjust the fader
again.
f °t
Ol }
o@@o
= Z
6o
21
Fader Control
°:i:ii:i:i:i
4 -I . .i .I .I
This is only displayed when setting the fader control
O[r. -.-
o o o o
z
D_
1
3,5 1,4,6
Select the Dolby Surround Pro Logic Il mode.
• The Dolby Pro Logic indicator lights.
/
SURROUND SELECT DOLB Y / DTS [ll_l LOGIC
MODE
DOLBY PL 11"]
(Malrl unit} (Remote control unit}
Play a program source with the rlrl[_] mark.
• For operating instructions, refer to the manuals of the
respective components.
®os
1
3
4,5,6
To Next Page
Loading...
Need help?
General
