Set the surround parameter mode.
SURROUND
pARAMETER
(Main unitl (Remote control unit)
Display
I'iO[?E !:::]:Hiiii:HFi]
-_ The on-screen display differs according to whether the operation is performed from the
main unit or the remote control unit.
"DOLBY PL I I
C INEMA EQ.
TONE 1
AFDM 4[_]_
SB CH OUT
4NON MTRX)
Yes4
4
Select the play mode.
SELECT
(Main unit)
DispEay
(Remote control unitl
H0[::,i![i::::i i.ii!i:Hi H0[::,i![................. ,"_'"=,.=,...,............. L,::[:i_]:,:::.=,
"DOLBY PL II
OPTIONS_
TONE
AFDM 4[_
SB CH OUT
4NON MTRX)
Yes4
Select the various parameters. (See "Surround parameters (_" for a description of the various parameters.}
SURROUND
PARAMETER
(Main unitl
F MODE_INEMA [_=-MODE MUSIC
PANORAMA
EQ
DIMENSION
CENTER WIDTH
(Remote control unit)
°L°°'C
A EQ
DOLBY PL II MUSIC
Optional Parameters
PANORAMA [_4:)lf_'_
DIMENSION 4 3
CENTER WIDTH 4 0
,_ When set with the on-screen display using the remote control unit
while in the MUSIC mode, set the " E_" mark to "OPTION <"
using the z_ and _ cursor buttons, then press the _ cursor button.
Press the ENTER button to return to the previous screen.
Set the various surround parameters.
SELECT
(Main unitl (Remote control unit)
When the surround parameters are set using the buttons on
the main unit, stop operating buttons after completing the
settings. The settings are automatically finalized and the
normal display reappears after several seconds.
When the settings are made using the buttons on the remote
control unit, press the SURR. PARA. button to finish.
NOTE:
• There are four Dolby Surround Pro Logic modes (NORMAL,
PHANTOM, WIDE and 3 STEREO). The AVR-2802/982 sets the
mode automatically according to the types of speakers set
during the system setup process (page 17).
Surround parameters
Pro Logic 11 Mode:
The Cinema mode is for use with stereo television shows and all
programs encoded in Dolby Surround.
The Music mode is recommended as the standard mode for
autosound music systems (no video), and is optional for AN
systems.
The Pro Logic mode offers the same robust surround processing
as original Pro Logic in case the source contents is not of optimum
quality.
Select one of the modes {"Cinema", "Music" or "Pro Logic"}.
Panorama Control:
This mode extends the front stereo image to include the surround
speakers for an exciting "wraparound" effect with side wall
imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either towards the front
or towards the rear.
The control can be set in 7 steps from o to 6.
Center Width Control:
This control adjust the center image so it may be heard only from
the center speaker; only from the left!right speakers as a phontom
_mage; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
44
To Next Page
Loading...
Need help?
General
