1
2
Select the input source.
[ Playback with a digital input I
@_Select an input source set to digital {COAXIAL!OPTICAL).
(see page 24).
(Main unit} (Remote cor}trol unit)
@_Set the input mode to "AUTO" or "DTS".
_NPUT MODE
_NPUT MODE
(Main unit) (Remote controlunit)
Select the Dolby/DTS Surround mode.
DOLBY/DTS
SURROUND
(Remote control unit)
When performing this operation from the main unit's panel,
press the SURROUND MODE button, then turn the SELECT
knob and select Dolby Pro Logic or DTS NEO:6.
SURROUND
MODE
(Main unit) (Main unit}
Play aprogramsourcewiththe L_g_t[_]AL , _ mark.
m • The Dolby Digital indicator lights
D_,Gt_AL
,O, Light when playing Dolby Digital sources.
_ Lrght
SIGNAL
DE_ECT
_Cr_ Light
• The DTS indicator lights when playing
DTS sources.
• The SIGNAL DETECT LED lights
when playing DTS-ES/6.1-channel
surround sources containing the
identification signal.
When the SIGNAL DETECT LED is lit, we recommend
turning the surround back channel using the 6.1/7.1
Surround button on the remote control unit and main unit
during playback.
Operate the 6.1/7.1 Surround button to switch Surround Back
CH ON/OFR
6¸1/7¸1
SURROUND
(Main unit)
1 3
%1:1 lCZ
3 1 2 4,5 2,6
F
1
2
1
4
5 6
SURROUND
8acKcn • Lights when the 6.1/7.1 Surround
OUTPUT
., / mode is on.
_O, Light
To Next Page
Loading...
Need help?
General
