EasyManuals Logo

Denon AVR-S700W User Manual

Denon AVR-S700W
268 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #176 background imageLoading...
Page #176 background image
o
WPS Router
Use a WPS-compatible router to connect.
There are two ways to connect, using the push button method or the
PIN code method. Select the connection method to match your router.
n
When connecting using the push button method
1. Select “Push Button” on the TV screen.
2. Switch to the WPS mode by pressing the WPS button of the
router you wish to connect to.
0
The time for pressing the button varies depending on the
router.
3. Select “Connect” on the TV screen within 2 minutes.
n
When connecting using the PIN code method
1. Select “PIN” on the TV screen.
2. Select the network you wish to connect to from the list of
wireless networks.
This displays the PIN code of the unit on the TV screen.
3. Register the PIN code of the unit in the router.
o
Manual
Enter the name (SSID) and password of the network you wish to
connect to.
1. Set the following items.
SSID: Input the name of the wireless network (SSID).
Security:
Select the encryption method according to the
encryption setting of the access point you are using.
Password: Input the password.
Default Key:
Select the Default Key.
When connecting to a “WEP” encrypted network,
“Default Key” menu is displayed.
2. Select “Connect” at the end of the setting.
The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or
tablet that supports wireless LAN connection.
When using a device that has a firmware version of iOS7 or later, “When connecting
using Wi-Fi” (v p. 175) in “Use iOS Device”.
1. Press and hold the TUNE + and TUNE buttons on the main unit for at least 3
seconds when the power of the unit is on.
2. Connect the wireless LAN of the PC or tablet used to “Denon AVR-S700W” when
the message “Connect your Wi-Fi device to Wi-Fi network called “Denon AVR-
S700W”” appears in the display.
3. Start up the browser and enter “192.168.1.16” in the URL.
4. Use the browser to enter the settings, select “Connect” and then exit the settings.
Contents Connections Playback Settings Tips Appendix
176
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-S700W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S700W and is the answer not in the manual?

Denon AVR-S700W Specifications

General IconGeneral
Channels7.2
Power Output per Channel75 W (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Frequency Response10 Hz - 100 kHz
Total Harmonic Distortion0.08%
Signal-To-Noise Ratio98 dB
Input Impedance47 kOhms
Input Sensitivity200 mV
HDMI Inputs6
HDMI Outputs1
Composite Inputs2
Component Inputs2
Analog Inputs4
Composite Output1
Component Output1
Wi-FiYes
BluetoothYes
AirPlayYes
DLNAYes
HDMI Pass-ThroughYes
HDMI SwitchingYes
3D TechnologyYes
Digital Inputs2 Optical
Supported Audio FormatsDTS-HD Master Audio, Dolby TrueHD
Supported Video Formats4K, 3D
Additional FeaturesAudyssey MultEQ
Tuner Presets56
Dimensions17.1 x 13.3 x 6.6 inches

Related product manuals