EasyManuals Logo

Denon AVR-S700W User Manual

Denon AVR-S700W
268 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #186 background imageLoading...
Page #186 background image
Firmware
Checks for the latest firmware information about updates and upgrades,
updates the firmware, and sets up the notification message display for
updates and upgrades.
o
Update
Updates the firmware of this unit.
Check for
Update:
Checks to see if the firmware is the latest version. You
can also check approximately how long it will take to
complete an update.
Update
Start:
Execute the update process. When the update starts,
the menu screen is shut down. During the update, the
progress is shown on the display.
This unit automatically retries updating if updating fails. If the update still fails,
either one of the following messages will appear on the screen. If the display
reads as shown below, check the settings and network environment, then update
again.
Display Description
Updating fail Updating failed.
Login failed Failure to log into server.
Server is busy Server is busy. Wait a while then try again.
Connection fail Failure in connecting to server.
Download fail Downloading of the firmware has failed.
o
Notifications
When the latest firmware is available, a notification message is
displayed on the TV screen at power on.
The notification message is displayed for about 40 seconds when the
power is turned on.
Update
On
(Default):
Display update message.
Off: Do not display update message.
Upgrade
On
(Default):
Display upgrade message.
Off: Do not display upgrade message.
Contents Connections Playback Settings Tips Appendix
186
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-S700W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S700W and is the answer not in the manual?

Denon AVR-S700W Specifications

General IconGeneral
Channels7.2
Power Output per Channel75 W (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Frequency Response10 Hz - 100 kHz
Total Harmonic Distortion0.08%
Signal-To-Noise Ratio98 dB
Input Impedance47 kOhms
Input Sensitivity200 mV
HDMI Inputs6
HDMI Outputs1
Composite Inputs2
Component Inputs2
Analog Inputs4
Composite Output1
Component Output1
Wi-FiYes
BluetoothYes
AirPlayYes
DLNAYes
HDMI Pass-ThroughYes
HDMI SwitchingYes
3D TechnologyYes
Digital Inputs2 Optical
Supported Audio FormatsDTS-HD Master Audio, Dolby TrueHD
Supported Video Formats4K, 3D
Additional FeaturesAudyssey MultEQ
Tuner Presets56
Dimensions17.1 x 13.3 x 6.6 inches

Related product manuals