o
Subwoofer
Set the presence of a subwoofer.
Yes
(Default):
Use a subwoofer.
No:
Select when a subwoofer is not
connected.
o
ZONE2
When “Amp Assign” is “5.1ch + ZONE2”, the speaker terminal used for
the ZONE2 speakers is displayed. The terminal is fixed to
“SURROUND BACK”.
SURROUND BACK:
The SURROUND BACK speaker
terminal is used for the ZONE2 speakers.
o
View Terminal Config.
This shows how to connect the speaker terminals for your “Speaker
Layout” setting on the menu screen.
Contents Connections Playback Settings Tips Appendix
190
Front panel Display Rear panel Remote Index
To Next Page
Loading...
