Denon AVR-X1200W Service Manual

Error
Code
DPMS Update Error Display Details of Error code Remedies
5B
U p d a t i n g f a i l 5 B
NACK received in response or
no response from Sub for the "L"
command.
Turn off and on the power. Updating
starts automatically.
5C
U p d a t i n g f a i l 5 C
No Update Packet received from
CY920 (Time Out).
Turn off and on the power. Updating
starts automatically.
5D
U p d a t i n g f a i l 5 D
Abnormal data in Update Packet
received from CY920 (CRCError).
Turn off and on the power. Updating
starts automatically.
5E
U p d a t i n g f a i l 5 E
Abnormal data in Update Packet
received from CY920 (PacketNo-
Error).
Turn off and on the power. Updating
starts automatically.
5F
U p d a t i n g f a i l 5 F
Setup failure of the XModem
transfer method.
Turn off and on the power. Updating
starts automatically.
60
U p d a t i n g f a i l 6 0
NACK received in response or
no response from Sub for the "P"
command.
Turn off and on the power. Updating
starts automatically.
61
U p d a t e C h e c k N G 6 1
Mismatched Check Sum in re-
sponse or no response from Sub
for the "I" command.
Turn off and on the power. Updating
starts automatically.
62
U p d a t i n g f a i l 6 2
Failed to start up Sub in Power On
sequence during Update.
Turn off and on the power. Updating
starts automatically.
80
U p d a t i n g f a i l 8 0
Write Enable Latch Bit not set in
Read after issuing the "WREN"
command.
Turn off and on the power. Updating
starts automatically.
81
U p d a t i n g f a i l 8 1
Block Erase failed in Read after
issuing the "BE" command.
Turn off and on the power. Updating
starts automatically.
82
U p d a t i n g f a i l 8 2
No Update Packet received from
CY920 (Time Out).
Turn off and on the power. Updating
starts automatically.
83
U p d a t i n g f a i l 8 3
Abnormal data in Update Packet
received from CY920 (CRCError).
Turn off and on the power. Updating
starts automatically.
84
U p d a t i n g f a i l 8 4
Abnormal data in Update Packet
received from CY920 (PacketNo-
Error).
Turn off and on the power. Updating
starts automatically.
85
U p d a t i n g f a i l 8 5
Setup failure of the XModem
transfer method.
Turn off and on the power. Updating
starts automatically.
86
U p d a t i n g f a i l 8 6
Mismatched Check Sum in Check
Sum comparison after rewriting.
Turn off and on the power. Updating
starts automatically.
A0
C o n n e c t i o n F a i l A 0
IP Address acquisition failure
(AutoIP).
Check the network connection. Carry
out the update in an environment that
has little network load.
67

Denon AVR-X1200W Specifications

General

HDMI in	6
AC (power) in	Yes
Composite video in	2
USB ports quantity	1
Digital audio coaxial in	0
Receiver type	-
Audio output channels	7.2 channels
Total Harmonic Distortion (THD)	1 %
Power output per channel (20-20KHz@8 Ohm)	145 W
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	Spotify
Product color	Black
Audio decoders	DTS-HD Master Audio
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	430 W
Connectivity technology	Wired
Optical drive included	No
Audio formats supported	AIFF, ALAC, FLAC

Weight and Dimensions

Depth	339 mm
Width	434 mm
Height	151 mm
Weight	8500 g