ChecktheUSBdevicebeingused
YES
Is the USB device supported by this unit?
Is a USB hub being used?
This unit supports devices in the FAT16-
and FAT32-formatted mass storage class,
MTP-compatible devices and iPod devices
(except for some models).
Do not use a USB hub.
NO
YES
NO
Checkingtheunit
YES
YES
Can a voltage (5V) be conrmed between pin 1 and pin 4 of JK101
(USB Connector) on USB PCB?
The USB signal circuit between CY920 and JK101 of the USB PCB are
faulty.
Are CN804 of the DIGITAL PCB and BN104 of the USB PCB correctly
connected?
The circuit around IC854 of the DIGITAL PCB
is faulty.
Connect the connectors correctly.
NO
NO
5.3.CannotrecognizetheconnectedUSBdevice
84