EasyManuals Logo

Denon AVR-X3200W User Manual

Denon AVR-X3200W
325 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #235 background imageLoading...
Page #235 background image
o
No sound comes out
Symptom Cause / Solution Page
No sound comes out of
speakers.
0
Check the connections for all devices. 26
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the
metal part on speaker terminals.
33
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. 33
0
Check that a proper input source is selected. 67
0
Adjust the volume. 68
0
Cancel the mute mode. 68
0
Check the digital audio input connector setting. 181
0
Check the digital audio output setting on the connected device. On some devices, the digital audio output
is set to off by default.
0
When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the
speaker terminal and PRE OUT connector.
No sound comes out when
using the DVI-D
connection.
0
When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a
separate audio connection.
Contents Connections Playback Settings Tips Appendix
235
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X3200W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X3200W and is the answer not in the manual?

Denon AVR-X3200W Specifications

General IconGeneral
Receiver typeSurround
Input sensitivity200 mV
Audio output channels7.2 channels
Signal-to-Noise Ratio (SNR)100 dB
Power output per channel (1KHz@6 Ohm)180 W
Power output per channel (20-20KHz@8 Ohm)105 W
HDMI in8
Audio (L/R) in5
Composite video in3
USB ports quantity1
Component video (YPbPr/YCbCr) in2
12V triggerYes
Speakers connectivity type-
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Internet radio services supportedvTuner
Optical drive includedNo
DisplayLCD
Product colorBlack
Audio decodersDTS-HD Master Audio, Dolby Surround, Dolby TrueHD
AC input voltage230 V
AC input frequency50 Hz
Power consumption (typical)650 W
Weight and Dimensions IconWeight and Dimensions
Depth388 mm
Width434 mm
Height167 mm
Weight11300 g

Related product manuals