Error
Code
Details of Error code Display Coping strategies
14
BlockWrite failed while rewriting
Main.
M a i n * * * m i n
U p d a t i n g f a i l 1 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
15
Error in Verify after rewriting Main
(CheckSumError).
M a i n * * * m i n
U p d a t e C h e c k N G 1 5
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
20
Unable to detect USB after
SBLMode.
C o n n e c t i o n f a i l
2 0
Disconnect and connect the USB
memory.
21
No FirmwareFile in USB after
SBLMode.
F i l e s N o t F o u n d
2 1
Disconnect and connect the USB
memory.
22
FirmwareFile in USB after SBLMode
for unsupported Model name/area
N o t M a t c h F i r m
2 2
Check the supported Model name/
area for the FirmwareFile.
23
Failed to obtain entire Firmware
information after SBLMode.
C o n n e c t i o n f a i l
2 3
Disconnect and connect the USB
memory.
24
TimeOut while obtaining entire
Firmware information after
SBLMode
C o n n e c t i o n f a i l
2 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
25 Failed to transit to SBLMode.
C o n n e c t i o n f a i l
2 5
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
26
TimeOut in Download (writing to
SDRAM) for FirmwareDownload
D o w n l o a d f a i l
2 6
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
27
Failed to write to EEPROM after
SBLMode.
C o n n e c t i o n f a i l
2 7
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
36 Unable to detect USB.
M a i n * * * m i n
C o n n e c t i o n F a i l 3 6
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the POWER
button for ve seconds.
37 No FirmwareFile in USB.
M a i n * * * m i n
F i l e s N o t F o u n d 3 7
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
38
FirmwareFile in USB for
unsupported Model name/area
M a i n * * * m i n
N o t M a t c h F i r m 3 8
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
39 TimeOut in USBCheck
M a i n * * * m i n
C o n n e c t i o n F a i l 3 9
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
3A
Unable to detect USB for
FirmwareDownload.
M a i n * * * m i n
C o n n e c t i o n F a i l 3 A
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
88
To Next Page
Loading...
