Denon AVR-X520BT

33
SURROUND MODES AND PARAMETERS
Sound modes and channel output
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v
p. 83)
.
Sound mode
Channel output
Front L/R Center Surround L/R Subwoofer
Direct (2-channel)
S Dz
Direct (Multi-channel)
SDDD
Stereo
S D
Multi Ch In
SDDD
Dolby Pro Logic
g SDDD
DTS Neo:6
SDDD
Dolby Digital
SDDD
Dolby Digital Plus
SDDD
Dolby TrueHD
SDDD
DTS Surround
SDDD
DTS 96/24
SDDD
DTS-HD
SDDD
DTS Express
SDDD
Multi Ch Stereo
SDDD
Virtual
S D
z Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 86)
Contents Connections Playback Settings Tips Appendix
111
Front panel Display Rear panel Remote Index
Sound modes and surround parameters
Sound mode
(v
p. 55)
Surr.Parameter (v
p. 67)
Tone
(v
p. 52)
Restorer
z
3
(v
p. 70)
Mode
(v
p. 67)
Dynamic
Comp.
z
1
(v
p. 68)
Low
Frequency
z
2
(v
p. 68)
Subwoofer
(v
p. 70)
Pro Logic g Music mode only
Neo: 6 Music
mode only
Panorama
(v p. 69)
Dimension
(v p. 69)
Center Width
(v p. 69)
Center Image
(v p. 68)
Direct (2-channel)
S
Direct (Multi-channel)
S S
Stereo
S S S S
Multi Ch In
S S
Dolby Pro Logic g S S S S S S S
DTS Neo:6
S S S S S
Dolby Digital
S S S
Dolby Digital Plus
S S S
Dolby TrueHD
S S
DTS Surround
S S S
DTS 96/24
S S S
DTS-HD
S S
DTS Express
S S S
Multi Ch Stereo
S S S S
Virtual
S S S S
z1
This item can be selected when Dolby Digital or DTS signal is played.
z2
This item can be selected when Dolby Digital or DTS signal or DVD-Audio is played.
z3
This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z4 This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v
p. 85)
Contents Connections Playback Settings Tips Appendix
110
Front panel Display Rear panel Remote Index