EasyManuals Logo

Denon AVR-X8500H Service Manual

Denon AVR-X8500H
209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
TROUBLE SHOOTING
1. POWER
0V
1.1. The unit does not power on
YES YES
NO
YES
NO
YES
NO
NO
Does the power indicator on the front panel
ash in green or white when the power is turned
on?
Is a fuse blown?
Does the power display on the front panel lights
green after approximately 10 seconds?
Check the voltage of [N6012 18, 19, 24 pin] on
the DIGITAL PCB while the power display is ash-
ing in green or white.
Remove the connector [N6012] of the SPEAKER PCB.
Check the "3-2. Protection History Display Mode"
The unit does not power on
Is a fuse blown?
Does the power shut down after several
seconds?
Is DC 5V being supplied from the SMPS PCB
[N6513] to the DIGITAL PCB?
See "1.2. Fuse is blown"
See "1.2. Fuse is blown"
Check the circuits around the Microprocessor
on the DIGITAL PCB and replace any faulty
parts.
TO "3-2. Protection History
Display Mode"
Are there any parts not fully connected into
the connectors that connect the PCBs?
Is DC5V output even when the connector
[N6001] supplying power from the SMPS PCB
to the DIGITAL PCB is removed?
Check the circuits around the Microprocessor
on the DIGITAL PCB and replace any faulty
parts.
Check for breakages and short circuits in the
circuits and parts between [N6001] on the
DIGITAL PCB and the microprocessor power
supply and replace any faulty parts.
Connect the connectors correctly.
TO "6. SMPS"
YES
Check for leaks and short
circuits in the parts on the pri-
mary side. Replace any faulty
parts.
Blown fuse
Check the rectier diode in the
rectier circuit on the second-
ary side, and check for short cir-
cuits. Replace any faulty parts.
Replace the fuse after repair.
Check for short circuits between
the regulator output terminal and
GND in the power supply stabiliza-
tion circuit. Replace faulty parts if
there is a short circuit.
1.2. Fuse is blown
NO
NO
NO
YES
YES
3.3V
NO
YES
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
82

Other manuals for Denon AVR-X8500H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X8500H and is the answer not in the manual?

Denon AVR-X8500H Specifications

General IconGeneral
Channels13.2
Power Output150W per channel (8 ohms, 20Hz-20kHz, 0.05% THD)
Frequency Response10Hz-100kHz (+1, -3dB)
HDMI Inputs8 (1 front)
HDMI Outputs3
Dolby AtmosYes
DTS:XYes
IMAX EnhancedYes
HEOS Multi-roomYes
Wi-FiYes
BluetoothYes
Voice ControlAmazon Alexa, Google Assistant, Apple Siri
Impedance4-16 ohms
HDR CompatibilityHDR10, Dolby Vision, HLG
Audio Return Channel (ARC)Yes
Digital Audio Inputs2 Optical, 2 Coaxial
Analog Audio Inputs6
Phono InputYes
Speaker ConnectorsBinding Posts
Supported Audio FormatsMP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Surround Sound SupportDolby Atmos, DTS:X, Auro-3D
TunerAM/FM
Input Sensitivity/Impedance200 mV / 47 kohms
HDCP Support2.2
Other ConnectionsUSB, Ethernet, RS-232C
Wireless ConnectivityWi-Fi, Bluetooth
Signal-to-Noise Ratio102 dB
DACAKM AK4490EQ (32-bit/192kHz)
Total Harmonic Distortion0.05% (20Hz - 20kHz, 150W)

Related product manuals