Connecting and playing back from a
computer (USB-DAC)
Enjoy music playback with high audio quality by inputting music files with
DSD or PCM signals stored on your computer to this unit through a USB
connection.
•Before connecting this unit to your computer, install the driver software
in your computer.
•Drivers do not need to be installed for Mac OS.
•As a playback player on your computer, use a commercially available or
downloadable player software of your choice that supports the playback
of high resolution audio sources.
2 Computer (recommended system)
OS
•Windows® XP Service Pack3, Windows® Vista, Windows 7 or
Windows 8
•Mac OS X 10.6.3 or later
USB
•USB 2.0: USB High speed/USB Audio Class Ver.2.0
2 Installing the dedicated driver (Windows OS only)
n Installing the driver software
1
Disconnect the USB cable between your PC and the
unit.
•The driver software cannot be installed correctly if your PC is
connected to the unit by a USB cable. When your PC was started
with the USB cable connected, disconnect the USB cable and
restart your PC.
2
Download the dedicated driver from the “Download”
section of the DA-300USB page of the Denon website
onto your PC.
3
Unzip the downloaded file.
4
Select the 32 bit or 64 bit exe file that matches your
Windows operating system, and double-click the file.
To Next Page
Loading...
