Denon DA-300USB - I am Not Satisfied with the Audio Quality of the Headphones Connector on the TV; I Want to Play Audio from the TV with the Amplifier Connected to this Unit; I Want to Reduce Power Consumption; Tips

To Next Page

To Previous Page

Appendix

SettingsPlaybackConnections

Contents

Front panel Display Rear panel Index

Tips

I want to play audio from the TV with the ampliﬁer connected to this unit

•Connect the digital audio output connector on the TV to the digital audio input connector on this unit (COAXIAL, OPTICAL-1, or OPTICAL-2), and then

switch the input source on this unit to the connector being used (COAXIAL, OPTICAL-1, or OPTICAL-2) (vpage14).

•2-channel linear PCM digital audio signals can be played back on this unit.

I am not satisﬁed with the audio quality of the headphones connector on the TV

•Input audio from the TV to this unit, and connect the headphones to the headphones connector on this unit to enjoy high quality audio.

Connect the digital audio output connector on the TV to the digital audio input connector on this unit (COAXIAL, OPTICAL-1, or OPTICAL-2), and then

switch the input source on this unit to the connected connector (COAXIAL, OPTICAL-1, or OPTICAL-2) (vpage14).

•2-channel linear PCM digital audio signals can be played back on this unit.

I want to reduce power consumption

•Set the Auto Standby mode to on (vpage22).

•When not using this unit for a long time, disconnect the AC adapter from the power outlet.

Other manuals for Denon DA-300USB