15
DCD-710AE
3.1
Normal heat run
mode
・Press the
/
13 button while name of the model is
displayed or H.R.NORMAL is displayed.
・Count this as the 0th heat run repetition.
q Play from the first to last track on disc.
w After disc playback has finished, move pickup
to innermost position and open tray.
e When loader open status detected, close tray
again, re-read TOC and start playback from the
first track on the disc.
r The heat run repetition no. is incremented
(increased by 1) when the tray is opened.
※ If the 2 and 5 button is pressed while operat-
ing, number of heat run is displayed for 3 sec-
onds.
t Conduct q to e repeatedly.
・Model Name display
・H.R.NORMAL display
・Normal heat run mode
Normal display except when 1 light, 3 flashing
q Normal display except when 1 light, 3 flashing
w
XXXX : No. of heat run repetitions
e Normal display except when 1 light, 3 flashing
r
XXXX : No. of heat run repetitions
3.2
Heat run Short
mode
・Press the
/
13 button while name of the
H.R.SHORT is displayed.
・Count this as the 0th heat run repetition.
q Play the last track only on disc.
w After disc playback has finished, move pickup
to innermost position and open tray.
e When loader open status detected, close tray
again, re-read TOC and start playback from the
first track on the disc.
r The heat run repetition no. is incremented
(increased by 1) when the tray is opened.
※ If the 2 and 5 button is pressed while oper-
ating, number of heat run is displayed for 3
seconds.
t Conduct q to e repeatedly.
・H.R.SHORT display
・Heat run Short mode
Normal display except when 1 light, 3 light
q Normal display except when 1 light, 3 light
w
XXXX : No. of heat run repetitions
e Normal display except when 1 light, 3 light
r
XXXX : No. of heat run repetitions
No
Key name
Function Display