13
SPECIAL MODE
Special mode setting button
b
Press the ON/STANDBY button to turn on the power while pressing both the button A and the button B at the same
time.
Mode Button A Button B Contents
µcom/DSP Version display mode STATUS DIMMER
Firmware versions such as Main or DSP are displayed in the
FL display. Errors are displayed or when they occur.
(Refer to page 14 .)
Initialization mode
DOCK
CONTROL
8
DOCK
CONTROL
9
Backup data initialization is carried out. (Refer to page 6 .)
Mode for switching tuner frequency
step
DIMMER PRESET CH +
---E2 model only---
Change tuner frequency step to AM9k/FM50kHz STEP or
AM:10k/FM:200kHz.
Mode for preventing remote control
acceptance
RESTORER SOURCE
f
Operations using the remote control are rejected.
"REMOTE LOCK:ON" is displayed in FL display.
(Mode the cancellation: Turn off the power and execute the
same button operations as when performing setup.)
b
When power is turned on, pressing both buttons A and B at the same time for 3 seconds or more.
Mode Button A Button B Contents
Select the video signal format STATUS DIMMER
Select with the "+", "-" and iPod play button change video
format NTSC or PAL
ON/STANDBY
RESTORER
DIMMERSOURCE f
STATUS
DOCK CONTROL 8
DOCK CONTROL 9
To Next Page
Loading...
Need help?
General
Weight and Dimensions
